22
Click
TEMP. UP
or
TEMP. DOWN
to change 00 to the
desired address as shown in Fig. 37. Press
OK
to confirm and
exit the setting interface.
Programmable Controller (40VM900003) —
When setting an address, connect only one wired controller to
an indoor unit.
1.
Press
FAN
and
BACK
simultaneously for 5 seconds to
access parameter settings as shown in Fig. 38.
2.
Press
TEMP. UP
or
TEMP. DOWN
to move the cursor
and choose IDU ADDRESSING. Press
MENU/OK
to
access this setting.
3.
Press
TEMP. UP
or
TEMP. DOWN
to choose the
address you want to set (see Fig. 39). Press
MENU/OK
to send this address to the IDU.
4.
Press BACK twice or wait 30 seconds to automatically
exit the parameter settings menu.
#
MODE
FAN
TEMP. DOWN
OK
TEMP. UP
ON/OFF
TIMER
ROOM TEMP.
SWING
Fig. 37 — Non-Programmable Controller
(40VM900002) Setting IDU Address
Fig. 38 — Programmable Controller
(40VM900003)
IDU Addressing Menu
MODE
FAN
MENU
TEMP. DOWN
TEMP. UP
OK
BACK
ON/OFF
Fig. 39 — Programmable Controller
(40VM900003)
Setting IDU Address
MODE
FAN
MENU
TEMP. DOWN
OK
TEMP. UP
BACK
ON/OFF