Carrier 40VCC3, Installation And Owner'S Manual

Page: 16 / 149

English
7. Local setting:
In the Menu interface, press the UP/DOWN/LEFT/RIGHT keys to move the cursor, and when the setting icon
flashes, press the OK key to enter the interface shown in the figure below. Press the UP/DOWN/LEFT/RIGHT keys
to move the cursor and press the OK key to confirm. The Default Screen Timeout is 15 s, default Brightness is
60%, default Schedule Index is Week, and the default Place is set as Home.
Operation
Setting
8. ECO function:
(1) In the menu interface, press the UP/DOWN/LEFT/RIGHT keys to move the cursor. When the ECO icon
flashes, press the OK key to enter; the initial password is 841226. The interface shown in the figure below
will appear. Then, press the UP/DOWN keys to move the cursor and the LEFT/RIGHT keys to adjust the unit/
group. Press the OK key to confirm.
(2) The ECO function by default is set as OFF. The default maximum temperature is 26°C in heating mode, and
the default minimum temperature is 23°C in cooling/dry mode.
(3) Temperature and time value adjustment: When the cursor flashes at a value, press the OK key to stop the
cursor from flashing and press the UP/DOWN keys to adjust the temperature or time value; then, press the OK
key again to confirm and resume the flashing of the cursor and press the UP/DOWN keys to move the cursor.
(4) After setting the ECO function to any group, the temperature of all normal indoor units of the group is set to a
certain temperature.
ECO
Screen
Timeout
Place
Schedule
Index
15s
30%
Week Unit/Group
Mall Office
Hotel Home
Brightness
30s
50%
1 min
60% 80%
3 mins
Cancel
Setting
28
Off
Temp/ Range
On
Heat mode
highest temp.
limit
23
Cool/Dry mode
lowest temp.
limit
Type No overrun 12 hrs 30 mins permitted
Move cursor, press the Enter key to adjust Selected Unit/Group
(Unit 22)
14