14
Fig. 6 —
Typical Unit Positioning
Typical positioning and alternate return air locations are shown in
Fig. 6. Alternate return air locations can be used by moving the
unit panel from the alternate return air location to the standard re
-
turn air location. Refer to overhead suspension accessory drawing.
(See Fig. 7.) for preferred suspension technique. The unit needs
support underneath to prevent sagging.
Fig. 7 —
Preferred Suspension Technique
LEGEND
Accessory Line
Alternate Air Intake and Discharge
Air Intake and Discharge
Plug
Plug
Condensate Drain
IMPORTANT: Do NOT attempt to install unit with return air
entering top panel of unit. Condensate will not drain from unit.
NOTE: Dimensions in [ ] are millimeters
OVERHEAD SUSPENSION ACCESSORY — UNIT SIZE 25
OVERHEAD SUSPENSION ACCESSORY — UNIT SIZES 28, 30
Summary of Contents for 40RU 25
