![background image](http://html.mh-extra.com/html/clas-ohlson/hb-124c-uk/hb-124c-uk_instruction-manual_2616551001.webp)
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.
co.uk and click on customer service.
ENGLISH
1
2
3
Ver
. 200803
Air Pump 230 V
Art.no 18-4043 Model HB-124C-UK
34-7831
HB-124C
Please read the entire instruction manual before
using the product and save it for future refer-
ence. We apologise for any text or photographic
errors and any changes of technical data.
If you have any questions concerning technical
problems please contact our Customer Service
Department (see address on reverse.)
Safety
- Pull out the plug from the wall socket before
you clean or carry out maintenance on the
pump.
- The power lead be changed if damaged in
order to avoid the risk of shock or fire, but
this should only be done by the manufactur-
er, qualified service station or professional.
- Never leave the pump unattended while in use.
- The pump is not intended for continuous use
or to pump e.g. car tyres.
- Never run the pump for longer than 20 min-
utes at a time. Let it cool off for 10 minutes
in between use.
- The pump may only be used in dry environ-
ments. Do not expose the pump to rain or
other moisture.
- Keep the inflation and deflation ports free
from dirt and moisture.
- Never direct the deflation port to the eyes
when the pump is in use.
- Keep the pump out of children’s reach.
- Store the pump in a dry place.
Description
Use
Inflation
1. Make sure the On/Off switch is in position 0
and then connect the plug to a wall socket.
2. Connect an adaptor to the deflation port
(2) which fits with the valve on the item you
want to inflate (on some larger air mattres-
ses and inflatable boats the valve can fit
directly onto the pump without any adaptor).
3. Set the On/Off switch in position I to start
the inflation. Hold the pump steady with one
hand during the entire inflation. Make sure
the inflation port is not blocked.
4. Set the On/Off switch in position 0 to shut off
the pump when you are finished with the infla-
tion. Remove the pump and pull out the plug.
Deflation
1. Make sure the On/Off switch is in position 0
and then connect the plug to a wall socket.
2. Connect an adaptor to the inflation port (1)
which fits with the valve on the item you
want to inflate (on some larger air mattres-
ses and inflatable boats the valve can fit
directly onto the pump without any adaptor).
3. Set the On/Off switch in position I to start
the deflation. Hold the pump steady with one
hand during the entire deflation. Make sure
the deflation port is not blocked.
4. Set the On/Off switch in position 0 to shut off
the pump when you are finished with the defla-
tion. Remove the pump and pull out the plug.
Note:
On smaller valves it may be required that the
valve is squeezed together with the fingers to
open the check valve and deflate the air. Never
run the pump for longer than 20 minutes at a time.
Let it cool off for 10 minutes in between use.
Disposal
Follow local ordinances when disposing of this
product. If you are unsure about the disposal of
this product contact your municipality.
Specifications
Rated Voltage:
230 V AC, 50 Hz
Power:
95 W
Sound level:
80 dB (A)
1. Deflation port
2. Inflation port
3. Adapters x 3