![background image](http://html.mh-extra.com/html/carrier/38xtz-007-024/38xtz-007-024_installation-operation-and-maintenance-instructions_2561915008.webp)
8
Fig. 4 - Dimensions, mm
38XTZ 016, 020 and 024
Outdoor air
discharge
Outdoor air
discharge
Outdoor
air inlet
Outdoor
air inlet
Outdoor
air inlet
Outdoor
air inlet
Outdoor
air inlet
See view A
Right-side view
Access
panel
Rear view
Refrigerant line
connections
Fans
View A
Plan view
Main disconnect switch
Suction line
connection 1-1/8"
Outdoor
air inlet
Liquid line
connection 5/8"
Power supply
Control box
Access panel
Compressor
access panel
Front view
View A
Profile view - unit base
4 lifting and transport
holes ø 35 mm
4 anchor and fixing
holes ø 14 mm
Note:
The unit includes four anchor
holes in the base section.
When designing an installation, always use up-to-date drawings, available from your local Carrier office.
Note:
Rain water is drained through holes in the
lower part of the base under the outdoor unit
heat exchanger and the fans.