![background image](http://html1.mh-extra.com/html/carrier/38ny018n/38ny018n_service-manual_2560727037.webp)
– 36 –
FILE NO. SVM-10035
<Stripping length of connection cable>
<Packed valve handling precautions>
•
Open the valve stem all the way out; but do not try
to open it beyond the stopper.
•
Securely tighten the valve stem cap with torque in
the following table:
•
Hexagonel wrench : A (Unit : mm)
Fig. 8-5-7
8-5-4. Wiring connection
1. Remove the valve cover, the electric parts cover
and the cord clamp from the outdoor unit.
2. Connect the connecting cable to the terminal as
identified by the matching numbers on the
terminal block of indoor and outdoor unit.
3. Insert the power cord and the connecting cable
carefully into the terminal block and secure
it tightly with screws.
4. Use vinyl tape, etc. to insulate the cords which
are not to be used.
Locate them so that they do not touch any electrical
or metal parts.
Gas side
Tightening torque
A
Gas side 65 to 80 N·m 4 mm
(
∅
12.70 mm) (6.5 to 8.0 kgf·m)
Gas side 16 to 18 N·m
Same as
(
∅
6.35 mm) (1.6 to 1.8 kgf·m)
Gas side
9 to 10 N·m
(0.9 to 1.0 kgf·m)
charging
Refrigerant
charging
A
Hexagonal wrench
is required.
TO CHARGE REFRIGERANT
Refrigerant
18 Class
No refrigerant
Less than
15 m
50 Hz, 220
-240V~ Single phase
Power source
Maximum
16A
running current
Plug socket &
20A
fuse rating
Power cord
4 mm
2
(H07RN-F or 60245 IEC66) or 3.5 mm
2
(AWG-12)
Model
18 Class
15 - 20 m (20g/m)
5. Secure the power cord and the connecting cable
with the crd clamp.
6. Attach the electric parts cover and the valve cover
on the outdoor unit.
Fig. 8-5-8
•
Wire type : More than 1.5 mm (H07RN-F or
60245 IEC66) or 1.3 mm (AWG-16)
2
2
NOTE: Connecting cable
CAUTION
•
Wrong wiring connection may cause some electrical
•
Be sure to comply with local rule on running the wire
from indoor unit to outdoor unit (size of wire and
wiring method, etc.).
•
Every wire must be connected firmly.
•
If incrrect or incomplete wiring is carried out, it will
cause an ignition or smoke.
•
Prepare the power supply for exclusive use with the
air conditioner.
•
This product can be connected to the mains.
Connection to fixed wiring : A switch which
disconnects all poles and has a contact separation
of at least 3 mm must be incorporated in the
fixed wiring.
L
N
1
3
2
Terminal block
Cord clamp
Earth line
Terminal screw
Cord clamp
Screw
Power supply cord Connecting cable
Power supply cord
Connecting cable
100
60
L N
10
70
10
10
80
10
1 2 3
Earth line
Service port
Summary of Contents for 38NY018N
Page 64: ...64 FILE NO SVM 03012...