![background image](http://html1.mh-extra.com/html/carrier/38hvm109303p/38hvm109303p_service-manual_2560676038.webp)
38
The units run with T3
<
3
for 80 minutes and T3 keeps
℃
lower than TCDI+2
f
℃
or more than 3
minutes.
----T4
<
0
,
℃
If the 1
st
condition and 2
nd
condition items are satisfied, then the program judges if T2 has decreased
more than 5
.When T2 has decreased more than 5
, enter the defrosting mode.
℃
℃
----No matter what value of the T4 is and whether the T2 drops more than 5
or not
℃
, if the machine
runs with T3
<
3
for more than 120 minutes and T3 keeps lower than
℃
TCDI+4
for more than 3
℃
minutes, the machine will enter defrosting mode.
Condition of ending defrosting:
If any one of the following items is satisfied, the defrosting will finish and the machine will turn to
normal heating mode.
----T3 rises to be higher than TCDE1
.
℃
----T3 keeps to be higher than TCDE2
℃
for 80 seconds.
----The machine has run for 10 minutes in defrosting mode.
Defrosting action
:
For 9k,12k models:
Compressor
on
off
on
on
on
off
off
off
4-way valve
Outdoor fan
Indoor fan
Indoor fan breeze(10s)
xx
10s
no longer than 10m
30s
FrequencyF8
10s
Frequency F2
XX=60.
Summary of Contents for 38HVM109303P
