![background image](http://html1.mh-extra.com/html/carrier/38bd-series/38bd-series_users-information-manual_2560547008.webp)
8
When the air conditioner is OFF:
• Press DELAY button. The clock advances one hour, while the
word START and the number 3 flash.
• Each additional pressing of the DELAY button advances the
clock by one hour.
• Make sure you point the remote controller at the air condi-
tioner while you press the DELAY button. The word START will
stop flashing when the command has been transmitted to the air
conditioner.
• TO CANCEL THE DELAY, FOLLOW THE INSTRUC-
TIONS IN THE "CANCELING A TIMER PERIOD START/
STOP TIME" SECTION. THE DELAY SETTING IS STORED
IN TIMER PERIOD NO. 3.
USING THE LOCAL SENSE FUNCTION (2 WAY RE-
MOTE)
The remote controller can operate so that it transmits the room
air temperature to the air conditioner at regular intervals from
wherever it is located in the room.
The air conditioner operates so that the room air near the remote
controller reaches the desired temperature.
• Press the SENSE button. The house symbol next to the tem-
perature display flashes.
• Place the remote controller in the desired room location.
• Make sure that there is a direct line of sight between the
remote controller and the air conditioner.
• To cancel the Local Sensor, press the SENSE button; the house
symbol disappears from the display.
OPERATING THE AIR CONDITIONER
FROM THE DISPLAY PANEL
(OR IF REMOTE CONTROLLER IS LOST)
Turning the Air Conditioner ON:
• Move the Operation Switch to the AUTO position. The air
conditioner operates at a temperature setting of 74°F, automati-
cally selecting the required operation mode and fan speed.
Turning the Air Conditioner OFF:
• Move the Operation Switch to the OFF position.
Returning to Remote Controller Operation:
• Move the Operation Switch to the REMOTE position.
• The remote controller operates the air conditioner.
ENERGY-SAVING TIPS
Your Carrier unit is designed to be highly efficient in energy
savings. Follow the below recommendations for even greater
efficiency.
1. Select thermostat setting that suits your comfort needs and
leave thermostat at that chosen setting.
2. Keep unit filter clean. The filter is very efficient in removing
T I M E R
S E T
C L E A R
S E N S E
M O D E
FAN
S W E E P
A
A
R O OM
DELA
Y
WARNING
Do not place remote controller in a drawer or near a
warm/hot appliance as the air conditioner will at-
tempt to cool the remotes environment.
!
FILTER
AIR CON
TIMER
POWER
COMP.
IMPED.
PRESS.
AUTO
OFF
REMOTE
PRESS.
AUTO
OFF
REMOTE
AUTO
OFF
REMOTE
(Console shown)
ON
OFF
REMOTE
FILTER AIR CON. TIMER POWER
ON
OFF
REMOTE
FILTER AIR CON. TIMER POWER
FILTER AIR
AUTO
OFF
E
(High wall shown)
COMPRESSOR
IMPEDANCE
PRESSURE
OFF
AUTO
(High wall shown)