background image

Copyright 2004 Carrier Access Corporation. All rights reserved.

The information presented in this manual is subject to change without notice and does not represent a 
commitment on the part of Carrier Access Corporation. The hardware and software described herein are 
furnished under a license or non-disclosure agreement. The hardware, software, and manual may be used or 
copied only in accordance with the terms of this agreement. It is against the law to reproduce, transmit, 
transcribe, store in a retrieval system, or translate into any medium - electronic, mechanical, magnetic, 
optical, chemical, manual, or otherwise - any part of this manual or software supplied with the Axxius 800 
for any purpose other than the purchaser’s personal use without the express written permission of Carrier 
Access Corporation.

The Carrier Access Logo, Adit, Axxius and solve for x are registered trademarks of Carrier Access 
Corporation. All other brand or product names are trademarks or registration trademarks of their respective 
companies or organizations.

Contact Information:

Carrier Access Corporation
5395 Pearl Parkway
Boulder, CO 80301-2490
Corporate Phone: (800) 495-5455
Fax: (303) 443-5908
www.carrieraccess.com

Customer Support Direct: (800) 786-9929
E-mail:

 

[email protected]

Supporting Software Version:

TSR Software Release 1.3

Axxius 800 Software Release 2.1

Adit 600 Software Release 8.0

RemoteValet Software Release 1.1

Summary of Contents for Terminal Server Router

















Reviews: