Carrett AT Gold Owner'S Manual Download

Page: 33 / 34

62 Garrett Metal Detectors

AT Gold

™

4.5" (11.5cm)

Super Sniper

™

Searchcoil—

Part No. 2222500

AT GOLD

ACCeSSOrIeS

use when searching for small, shallow

targets or in trashy or tight places.

6" x 9" (15 x 23cm) PRO

formance

Concentric

Searchcoil—

Part No. 2222600

This waterproof searchcoil offers

excellent depth for medium-sized

targets in less mineralized soils.

9" x 12" (23 x 30.5cm) PRO

formance

Concentric Searchcoil—

Part No. 2222700

This larger size concentric searchcoil

is waterproof and offers excellent

depth for larger targets in less

mineralized soils.

This larger size DD searchcoil is

waterproof, offers maximum depth

for larger targets in more mineralized

soils, and offers excellent separation

for adjacent targets.

8.5" x 11" (21.5 x 28cm) PRO

formance

DD Searchcoil—

Part No. 2222700

5" x 8" (13 x 20cm) DD Searchcoil Cover—

Part No. 1607400

Protect the searchcoil's surface from

scratching and chipping during use.

Garrett

PRO-POINTER

Pinpointing Detector—

Part No. 1166000

The

PRO-POINTER

combines performance with sleek design to

assist in pinpointing hard-to-find targets. Includes proportional

audio/vibration pulse rate target indicators and 360° side scan

detection area. Water resistant with leD light for low light uses.

Includes woven belt holster and 9-volt battery.

To see Garrett's complete collection of metal detector

accessories, please visit www.garrett.com and view products
within our Hobby Division.

Waterproof Headphones—

Part No. 2202100

required when the headphones will

be immersed in water.

1/4" Headphone Adapter—

Part No. 1626000

Allows use of standard headphones

with a 1/4" male phone plug with

the Garrett

AT Gold

(Not intended

for submerged use.)

Summary of Contents for AT Gold



































Search results

Summary of Contents for AT Gold

Reviews:

Related manuals for AT Gold

Brands by name

Popular brands

Carrett AT Gold, Owner'S Manual

Search results

Summary of Contents for AT Gold

Reviews:

Related manuals for AT Gold

Brands by name

Popular brands