KEYLESS ENTRY INSTRUCTION • USER GUIDE
• Unlock: Press the
button on the remote transmitter once to unlock the car. The parking lights will gleam twice. Press
and hold two seconds to release trunk.
• Lock: Press the button on the remote transmitter once to lock the car. The parking lights will gleam once and all
electronical windows will close themselves in 30 seconds.
• Trunk releasing: Press the button on the remote transmitter once to release the trunk. The parking lights will gleam
three times.
• Location: There are two ways to determine the location of your car. Press the button one time. The parking lights
gleam three times. When locked, press the button on the remote transmitter once. The parking lights will gleam three
times.
• Learning code: Press the learning code button on the ‘Brain Case’ once. When the parking lights are ON and you can
press any button on the remote transmitter, you are in the learning mode. When the parking lights are OFF, the learning
mode is finished. By repeating this action, you can add a maximum of four remote transmitters to your ‘Brain Case’. If
you add more than four remote transmitters, the first four will be deleted.
installing the keyless entry systeM
See diagrams.
• Negative / positive output option for trunk releasing:
Plug in position 1-2 for +12V output;
Plug in position 2-3 for -12V output (to GND).
• Time options of central door locking system:
Plug in position 2-3 is 0,5 seconds for electric central lock;
Plug in position 1-2 is 3,5 seconds for pneumatic central lock.
declaration of conforMity
Service Best International B.V.
De Run 4271
5503 LM Veldhoven
The Netherlands
T: +31 (0)40 2302300
F: +31 (0)40 2302302
hereby declares that 0260050 Keyless entry system, remote control is in compliance with the essential requirements and
other relevant provisions of EN 60950-1:2006+A11:2009+A1:2010+A12:2011, EN 62479:2010, ETSI EN 301 489-1
V1.9.2 (2011-09), ETSI EN 301 489-3 V1.4.2 (2002-08), ETSI EN 300 220-1 V2.3.1 (2010-02), ETSI EN 300 220-2 V2.3.1
(2010-02) (Directive 1999/5/EC Annex IV (R&TTE).
The Technical Construction File is maintained at our offices in Veldhoven, The Netherlands.
Veldhoven, 27/3/2013
P. Zwanenburg, managing director
