21
IMPORTANT SAFETY INSTRUCTIONS
Beware: mains Voltage!
Acute danger to life!
Beware: Hot Lamp!
ꢀꢀꢀꢀꢀꢀꢀꢀ
•
Attention:
ꢀꢀ
The
ꢀꢀ
lamp
ꢀꢀ
head can
ꢀꢀ
reach
ꢀꢀ
high
ꢀꢀ
temperatures!
•
ꢀꢀ
When
ꢀꢀ
in
ꢀꢀ
use
ꢀꢀ
the
ꢀꢀ
lamp
ꢀꢀ
head
ꢀꢀ
should
ꢀꢀ
neither
ꢀꢀ
be
ꢀꢀ
rolled
ꢀꢀ
nor
ꢀꢀ
covered
ꢀꢀ
up,
ꢀꢀ
nor
ꢀꢀ
should
ꢀꢀꢀꢀ
it
be pressed or tied down to any surface, as the heat generated during operation
needs to dissipate from the whole surface of both rear and front side.
•
We
ꢀꢀ
generally
ꢀꢀ
recommend
ꢀꢀ
the
ꢀꢀ
use
ꢀꢀ
of
ꢀꢀ
the
ꢀꢀ
supplied
ꢀꢀ
frame.
•
ꢀꢀꢀꢀ
Do not
ꢀꢀ
stick
ꢀꢀ
any
ꢀꢀ
nails,
ꢀꢀ
pins,
ꢀꢀ
staples
ꢀꢀ
or
ꢀꢀ
similar
ꢀꢀ
objects
ꢀꢀ
into
ꢀꢀ
the
ꢀꢀ
lamp
ꢀꢀ
body,
ꢀꢀ
please
ꢀꢀꢀꢀ
use the existing eyelets.
•
ꢀꢀ
Do
ꢀꢀ
not
ꢀꢀ
operate
ꢀꢀ
the
ꢀꢀ
lamp
ꢀꢀ
if
ꢀꢀ
you
ꢀꢀ
observe
ꢀꢀ
any
ꢀꢀ
visual
ꢀꢀ
damage.
ꢀꢀ
If
ꢀꢀ
any
ꢀꢀ
damage
ꢀꢀ
is
ꢀꢀ
identi
fi
able,
ꢀꢀ
the
ꢀꢀ
relevant
ꢀꢀ
parts
ꢀꢀ
must
ꢀꢀ
be
ꢀꢀ
replaced. Aalternatively,
ꢀꢀ
please
ꢀꢀ
contact
CARPETLIGHT
GmbH or one of our distributors/sales partners.
•
ꢀꢀ
When
ꢀꢀ
hanging
ꢀꢀ
this
ꢀꢀ
product, please
ꢀꢀ
ensure
ꢀꢀ
ꢀꢀ
that
ꢀꢀ
the
ꢀꢀ
lamp
ꢀꢀ
head
ꢀꢀ
and
ꢀꢀ
ancillary
ꢀꢀ
equipment
ꢀꢀ
is properly secured using a safety cable.
•
ꢀꢀ
Please make sure of the stability and reliability of the attachment.
•
ꢀꢀ
Stands
ꢀꢀ
must
ꢀꢀ
be
ꢀꢀ
set
ꢀꢀ
up
ꢀꢀ
correctly
ꢀꢀ
and
ꢀꢀ
it
ꢀꢀ
is
ꢀꢀ
to
ꢀꢀ
be
ꢀꢀ
ensured
ꢀꢀ
that
ꢀꢀ
they
ꢀꢀ
are
ꢀꢀ
designed
ꢀꢀ
to
ꢀꢀ
carry the designated load.
•
It
ꢀꢀ
is
ꢀꢀ
advisable
ꢀꢀ
to
ꢀꢀ
wear
ꢀꢀ
suitable
ꢀꢀ
protective
ꢀꢀ
clothing
ꢀꢀ
when
ꢀꢀ
working
ꢀꢀ
with
ꢀꢀ
lamps
ꢀꢀ
to
ꢀꢀ
prevent injuries and burns.
•
ꢀꢀ
Please
ꢀꢀ
observe
ꢀꢀ
the
ꢀꢀ
weight
ꢀꢀ
of
ꢀꢀ
lamp heads
ꢀꢀ
and
ꢀꢀ
ancillary
ꢀꢀ
equipment
ꢀꢀ
when
ꢀꢀ
carrying
ꢀꢀ
or
ꢀꢀ
lifting, and take into consideration preventive measures recommended by local
trade associations according to occupational safety law.
•
ꢀꢀ
When
ꢀꢀ
laying
ꢀꢀ
out
ꢀꢀ
the
ꢀꢀ
connecting
ꢀꢀ
cables,
ꢀꢀ
please
ꢀꢀ
avoid
ꢀꢀ
tripping
ꢀꢀ
dangers
ꢀꢀ
for
ꢀꢀ
personnel
ꢀꢀ
or
ꢀꢀ
damages that can occur from vehicles by using suitable warning signs
and/or coverings.
•
The
ꢀꢀ
lamp head
ꢀꢀ
and
ꢀꢀ
its
ꢀꢀ
electrical
ꢀꢀ
safety
ꢀꢀ
system
ꢀꢀ
are
ꢀꢀ
to
ꢀꢀ
be
ꢀꢀ
inspected
ꢀꢀ
prior
ꢀꢀ
to
ꢀꢀ
any
ꢀꢀ
operation.
•
The
ꢀꢀ
faultlessness
ꢀꢀ
of
ꢀꢀ
the
ꢀꢀ
power
ꢀꢀ
supply
ꢀꢀ
and
ꢀꢀ
the
ꢀꢀ
safety
ꢀꢀ
device
ꢀꢀ
connection
ꢀꢀ
to
ꢀꢀ
the
ꢀꢀ
lamp head is to be checked before every operation.
•
ꢀꢀ
Please
ꢀꢀ
ensure
ꢀꢀ
that
ꢀꢀ
the
ꢀꢀ
correct
ꢀꢀ
safety
ꢀꢀ
distance
ꢀꢀ
to
ꢀꢀ
sensitive
ꢀꢀ
and
ꢀꢀfl
ammable
ꢀꢀ
objects
ꢀꢀ
is
ꢀꢀ
observed,
ꢀꢀ
the
ꢀꢀ
maximum
ꢀꢀ
heat
ꢀꢀ
is
ꢀꢀ
generated
ꢀꢀ
at
ꢀꢀ
the
ꢀꢀ
backside
ꢀꢀ
of
ꢀꢀ
the
ꢀꢀ
lamp!
•
ꢀꢀ
Note:
ꢀꢀ
the
ꢀꢀ
glare
ꢀꢀ
and
ꢀꢀfl
ashes
ꢀꢀ
emitted
ꢀꢀ
from
ꢀꢀ
a
ꢀꢀ
lamp
ꢀꢀ
can
ꢀꢀ
impair
ꢀꢀ
vision,
ꢀꢀ
and
ꢀꢀ
can
ꢀꢀ
lead
ꢀꢀ
to
ꢀꢀ
accidents
ꢀꢀ
(e.g.
ꢀꢀ
on
ꢀꢀ
steps
ꢀꢀ
or
ꢀꢀ
in
ꢀꢀ
traf
fi
c
ꢀꢀ
etc.).
