ULW Czech, s.r.o.
V Ráji 34, Praha 9
-
Hostavice, 198 00, CZ, IČO: 28256212, DIČ: CZ28256212
9.5.
Holder installation requires at least basic mechanical and electrical skills. If you are in
doubt, have the Holder installed by a professional workshop.
9.6.
Protect the charging pins in the Holder from mechanical damage. Especially take care when
inserting the Device into the Holder not to hit the charging pins with the Device
–
they
could be damaged inside even if you cannot see any damage with naked eye. Damaged
charging pins will cause charging problems (no charging or insufficient charging).
9.7.
Protect the charging pins from being connected to one another with electrically conductive
materials.
9.8.
Mounting Holder
9.8.1.
The base plate of the Holder contains 6 nuts for M5 screws. Screws are not
included.
9.8.2.
The mounting nuts create a standard AMPS hole pattern (30x38mm) in the
landscape orientation.
9.8.3.
When Carpe Iter mounting brackets (paid accessory) are used, the Holder can be
mounted horizontally and vertically.
