m 6370 N. Irwindale Rd. Irwindale, CA 91702 (866) 796
MC3
E
NCLOSURE
•
Or if set to the off position,
which prevents the enclosure from opening. A padlock can be inserted through
the tab to prevent users from activating the switch as well. If the tab is pushed
back in the encl
osure can be opened freely.
•
CAUTION, the following to be performed by authorized personnel only:
circumvent this mechanical interlock and power up the system with the door
open (Often necessary when troubleshooting), turn the system off, open the
enclo
sure then use fingers or a tool to carefully switch the oval shaped
disconnect on.
iv.
Power
The device labeled power functions as both an indicator light and a pushbutton.
Illumiating Solid:
The green power light illuminates
is reporting power and is booted up.
Slow Blink:
The indicator will blink when the turntable is in motion.
Pushbutton
: Serves as a "shift" key to alter other commands. Specifics of use are
defined in the command button
v.
Alert
Solid:
The red alert light will illuminate solid
the VFD. Contact
Carousel USA if this problem occurs.
Slow blink:
VFD FAULT
may range from insignificant to a severe problem. Contact Carousel USA if a fault is
persistent and prevents proper use of the equipment. Resetting a fault is covered in
the JOG command section below.
Fast blink: E-
STOP ENGAGED
the E-
Stop by twisting it clockwise and pulling out.
Pushbutton
:
STOP
A momentary push of this button will trigger a stop command. The
turntable will decelerate to a stop. Other tha
preferred way to stop the turntable if there is unintended movement.
This key also serves as a "shift" key to alter other commands. Specifics of use are
defined in the command button sections below.
Page
7
of
15
usa.
NCLOSURE
H
ARDWARE
M
ANUAL
Or if set to the off position,
t
he switch features a tab that can be
which prevents the enclosure from opening. A padlock can be inserted through
the tab to prevent users from activating the switch as well. If the tab is pushed
osure can be opened freely.
CAUTION, the following to be performed by authorized personnel only:
circumvent this mechanical interlock and power up the system with the door
open (Often necessary when troubleshooting), turn the system off, open the
sure then use fingers or a tool to carefully switch the oval shaped
The device labeled power functions as both an indicator light and a pushbutton.
The green power light illuminates
solid when the low voltage system
is reporting power and is booted up.
The indicator will blink when the turntable is in motion.
: Serves as a "shift" key to alter other commands. Specifics of use are
defined in the command button
sections below.
The red alert light will illuminate solid
when there is a communication fault with
Carousel USA if this problem occurs.
VFD FAULT
A slow blink indicates
that the VFD has experienced a fault. This
may range from insignificant to a severe problem. Contact Carousel USA if a fault is
persistent and prevents proper use of the equipment. Resetting a fault is covered in
the JOG command section below.
STOP ENGAGED
A fast blink indicates that the E-
Stop is engaged.
Stop by twisting it clockwise and pulling out.
A momentary push of this button will trigger a stop command. The
turntable will decelerate to a stop. Other than using the PC based controls, this is the
preferred way to stop the turntable if there is unintended movement.
This key also serves as a "shift" key to alter other commands. Specifics of use are
defined in the command button sections below.
he switch features a tab that can be
pulled out
which prevents the enclosure from opening. A padlock can be inserted through
the tab to prevent users from activating the switch as well. If the tab is pushed
CAUTION, the following to be performed by authorized personnel only:
To
circumvent this mechanical interlock and power up the system with the door
open (Often necessary when troubleshooting), turn the system off, open the
sure then use fingers or a tool to carefully switch the oval shaped
The device labeled power functions as both an indicator light and a pushbutton.
solid when the low voltage system
: Serves as a "shift" key to alter other commands. Specifics of use are
when there is a communication fault with
that the VFD has experienced a fault. This
may range from insignificant to a severe problem. Contact Carousel USA if a fault is
persistent and prevents proper use of the equipment. Resetting a fault is covered in
Stop is engaged.
Reset
A momentary push of this button will trigger a stop command. The
n using the PC based controls, this is the
preferred way to stop the turntable if there is unintended movement.
This key also serves as a "shift" key to alter other commands. Specifics of use are
www.carousel-usa.com
15206 Ceres Avenue
,
Fontana
CA 92
335
(866)
796-5975
