15
address not found in the table returns an exception response to the master (if
enabled).
Start Id / End Id
Enter a range of 8 bit Modbus addresses. Any Modbus packet that falls within
this range is forwarded to the Host Address.
Host Address
This is the IP Address of the remote Modbus/TCP slave.
Close Idle TCP Sockets after
Sockets are opened as required. Entering a 0 holds a single socket open to the
last remote Modbus/TCP slave accessed. Otherwise enter values 3 to 60 to
automatically close the last socket after 3 to 60 seconds of idle time.
Redundant Entry Retries after
Enter the time in seconds for redundant entry retries or set to 0 to disable the
feature.
CONFIGURABLE PINS
Figure 7: Configurable Pin Settings
No adjustment should be made to these settings. They should be left at their
defaults as shown above.