Nozzle Cleaning
21
21
Nozzle Cleaning
1
2
3
4
Perform manual nozzle cleaning operation as follows:
Open both cover and seat.
Press and hold the temperature - button and then press the decrease flow button once.
The nozzle will then extend and water will flow to clean.
The nozzle will retract after 5 minutes or when the Stop button is pressed
on the remote control.
The nozzle spray piece can be removed as shown below by pulling.
The same operation can be performed without the remote control by pushing both the drier
button and front wash button on the control unit on the side of the seat.
Summary of Contents for Livewell 300070W
