Caroma Livewell 300070W, Installation And Operating Instructions Manual

Page: 14 / 24

Adjusting the Nozzle Position
14
≥6S
14
OR
Adjusting the Nozzle Position
During Rear Wash or Female Wash, press the Position button on the remote control
then press Increase (+) or Decrease (-) to adjust the position of the nozzle.
The lights on the remote control will change to indicate the setting.
Adjusting the Temperature
During Rear Wash or Female Wash or Drying, press the Temperature
Increase (+) or Decrease (-) on the remote control to adjust the
temperature.
Setting the Night Light
Press and hold the Temperature Increase (+) on the remote control, and
then press Position Decrease (-) to alternate bewteen the different modes:
Off: When one (1) indicator light is on.
Always On: When two (2) indicator lights are on.
Smart: When three (3) indicator lights are on.
Night Light is set to Always On mode by default.
Power Standby Mode
To go into Power Standby Mode, close the cover and press the Air Dry button
for 6 seconds. Press the Air Dry button again or 6 seconds to come out of
Standby Mode.
Sound Setting
The sound is ON by default. When the sound setting is ON there is an
audible beep when the bidet receives commands or signals.
Press and hold the Tempe button then press the
Female Wash button to turn on and off the audible beep.
OFF MODE: when one indicator light is on.
ON MODE: when two indicator light is on.
The lights on the remote control will change to indicate the setting.
Note: In Smart mode, the night light will be ON in a dark environment and
OFF in a bright environment.