8
www.CarnivalKingSupplies.com
.
||||| [email protected]
BLOCK Ice Shaver Machine Manual
Blade Maintenance & Replacement Instructions
REMOVING THE SHAVING PLATE
1. To remove ice shaving plate, unscrew the adjustment knob completely. Then remove the two screws underneath the
shaving plate.
2. Fixed metal parts can now be removed and the ice table can be moved upward.
CLEANING BLADE
1. Wash blades with water.
2. If stains cannot be removed use a warm damp soft cloth.
3. After cleaning, spray with kitchen alcohol.
INSTALLING THE SHAVING PLATE
1. Place shaving plate in its original place and rotate blade adjustment button to lower it.
2. Fasten fixed metal plates with the two screws from step 1 of "Removing the Shaving Plate"
ROTARY TRAY, NAIL CLEANING
1. Wash nails with water.
2. After cleaning, spray with kitchen alcohol.
BLADE REPLACEMENT
1. Refer to the "Removing the Shaving Plate" instructions for removing the Shaving Plate.
2. Remove the 3 screws fastening blade.
WARNING: Inner blade is hidden.
ADJUSTING THE INSTALLATION POSITION OF THE BLADE
1. Rotate the blade adjustment knob clockwise until tight.
2. Unscrew the screws in the blade.
3. When the top blade is in middle position or ice table, the blade can be installed.
4. Fasten with screws.
GREASING
1. Grease corkscrew once a month with food safe grease, greasing 'up and down the spiral rod.
2. Remove protective covering at the top of the machine (the sleeve that protects the corkscrew rod) and grease the spiral
rod. Replace protective covering by rotating clockwise to install.
