Carmanah 502, Owner'S Manual

Page: 7 / 16

Owner’s Manual | Model 502
7
© 2008 Carmanah Technologies Corporation
Revised: August 2008
You can program multiple settings within one session by pressing any button within the 1 minute window
that the infrared sensor is on. Pressing the Start button causes the infrared sensor to remain on for an
additional minute from the time the button was pressed. If the button is not pressed within the 1 minute
window you must re-transition the light and re-enter the security code to complete or continue
programming the light.
When programming a Model 502 light, the key sequence on the programmer and the responding flash
sequence from the light is always in the format shown in
Figure 3-1 regardless of the settings being
configured.
Figure 3-1: Programming Sequence
Press
Start Single
flash from
the light Press the
first
number of
the code Single
flash from
the light Press the
second
number of
the code Single
flash from
the light Press the
third
number of
the code Single
flash from
the light Press
Enter Single
flash from
the light
Do not press the buttons on the programmer too fast and do not proceed until you see a
flash from the light.
One of the flash patterns described in Table 3-2: Programming Completion displays after the
programming sequence is complete. The flash pattern indicates whether or not the programming was
successful.
Table 3-2: Programming Completion
Programming Result Flash Pattern Description
Successful
Three quick consecutive flashes indicate that the code has been
accepted. You will see this flash after every successful entry.
Unsuccessful
Two longer flashes indicate that the code has not been accepted.
Restart the programming sequence.
Figure 3-2: Successful Programming Sequence
Figure 3-3: Unsuccessful Programming Sequence
An unsuccessful programming sequence for the Model 502 light occurs for one of the following reasons:
Š the light does not recognize the sequence, or
Š the light has not received the correct security code
If the programming sequence is unsuccessful, re-enter the key sequence for the required code. If the
programming sequence is still unsuccessful, re-enter the security code.