AUTO-i 700
49
Chapter 6:Vehicle Diagnosis
3.Parameter Data
- In the PARAMETER DATA menu, the module can communicate with the vehicle ECU
to check data and control values of each sensor of the selected system and to check
conditions of various switches and actuators.
It is important to select the vehicle specifications correctly for accurate
parameter data measurement. Make sure to set the vehicle displacement,
manufactured year, fuel, etc. correctly.
The parameter data list can differ evenwith the same vehicle models
-Parameter Data Selection -
NOTE) The menu for Parameter data selection, shown in the above picture, can differ by
vehicle makers and models.
1. When selecting the correct vehicle model and system from the menu and communication
with the vehicle is properly established, the menu appears as the picture above.
Select Parameterdata and press the ENTER key
If the message indicating a communication error is displayed instead
of the menu like the figure above or communication cannot be established,
check the vehicle condition and the connection status of the diagnostic connector again.