AUTO-i 700
25
Chapter 2: Menu Configuration
1. Before Getting Started
1-1.
Before using the system, check whether or not the battery is fully charged. If it
is notcharged, then connect external power supply or recharge the battery
before using thesystem.
- If you use the system by connecting it to a vehicle, you can also feed power
to it through the vehicle diagnostic connector.
If power is not feed by the vehicle diagnostic connector, you need to
connect the cigarette lighter power cable to feed power before you
start communication with the vehicle. Voltage mismatch between the
ECU and AUTO-i 700 may cause a communication error.
1-2.Before using the system, make sure to download the diagnosis program.
The diagnosis program will be stored in the system memory.
- Before using the system, check if the diagnosis program matches the
optionyouhave purchased.
- Basically, a diagnostic program is installed before delivery.
Also, you can get the latest diagnostic data from our website or from where
you purchase.