Carlton SP4012, Owner'S Manual

Page: 48 / 139

SP4012 MACHINE MAINTENANCE
28
•
Clean out Poly Chain
®
Guard by
removing bottom portion of guard
weekly . Chip build up will wear Poly
Chain
®
Belt.
•
Check cutter wheel, pockets, and teeth
for wear. If any repair is needed, see
“Servicing Cutter Wheel” section for
further instruction.
Always clean tip of grease gun fitting and grease fitting on machine before attaching hose
to prevent dirt from being forced into machine parts.
•
Grease jackshaft bearings Daily . These
bearings should be purged using grease
EVERYDAY. Purge till new grease
comes out. Use Texaco Starplex II
grease.
The jackshaft bearing grease
fittings can be accessed easily through
the jackshaft bearing cover.
•
Grease cutter wheel bearings Daily .
These bearings should be purged using
grease
EVERYDAY. Purge till new
grease comes out. Use Texaco Starplex
II grease.