Carlton SP4012, Owner'S Manual

Page: 46 / 139

SP4012 MACHINE MAINTENANCE
26
SAFETY
•
NEVER SERVICE A MACHINE WITH THE ENGINE RUNNING, SEVERE
PERSONAL INJURY COULD OCCUR. TURN ENGINE OFF THEN REMOVE
IGNITION KEY AND DISCONNECT POSITIVE BATTERY CABLE TO AVOID
STARTING MACHINE ACCIDENTALLY.
•
CUTTER WHEEL MUST BE DISENGAGED BEFORE TURNING ENGINE
ON/OFF AND BEFORE SERVICING A MACHINE. OTHERWISE SEVERE
PERSONAL INJURY COULD OCCUR AS WELL AS MACHINE DAMAGE.
•
ALL MACHINE PARTS MUST COME TO A COMPLETE STOP AND HAVE
TIME TO COOL COMPLETELY BEFORE SERVICING A MACHINE OR
SEVERE INJURY COULD OCCUR, POSSIBLY SERIOUS BURNS AND/OR
DISMEMBERMENT.
•
DO NOT OPERATE A MACHINE WITHOUT A COMPLETE NUMBER OF
TEETH IN THE CUTTER WHEEL PROPERLY INSTALLED. EXCESSIVE
MACHINE VIBRATION WILL OCCUR CAUSING PREMATURE BEARING
FAILURE AND EQUIPMENT DAMAGE.
•
PLACE THE CUTTER WHEEL ON THE GROUND WHEN PERFORMING
SERVICE ON A MACHINE.
•
Check engine oil at dipstick daily ; take
reading with engine sitting level (see
photos) . Add recommended oil and
change oil as required. (See engine
owners’ manual.) Lombardini
recommends changing oil and oil filter
every 300 hours in a clean environment.
However, in the dusty environment of a
stump cutter, we recommend changing
the oil and oil filter every 50 hours of
operation.
SP4012 Kubota Diesel Engine Filters
- 0200134 Oil Filter
- 0200134A Fuel Filter
- 0200102C Air - Main Filter
- 0200102D Air - Safety Filter
INCORRECT POSITION
CORRECT POSITION