Carlson Rugged Tablet RT4, User Manual

Page: 16 / 66

16 | Page
Carlson RT4 User Manual
SD Cards
SD Cards
The RT4 has a slot for a micro SD card located in the battery compartment.
The card slot and flexible card holder are designed to hold the card
securely in place so it will not come out or disconnect if the tablet is
dropped. To insert or remove a card, follow these steps:
1. Power off the tablet.
2. Remove the battery door as outlined in Chapter 1.
CAUTION: The RT4 is not sealed against water and dust when the battery
pack and battery door are not installed properly.
CAUTION:
Always power off the tablet before removing the battery. Failure
to do so may cause loss of data or damage to the tablet. EXCEPTION: If
your tablet has an internal battery, this caution does not apply. You can
safely remove the removable battery while the unit is running.
3. Remove the battery pack by pulling up on the black tab on the battery
pack.
4. An image on the battery compartment label shows the correct
location and orientation for the SD card (slot on the right). Pull the
flexible card holder back out of the way. Push the card into the slot to
insert it.
5. Push the flexible card holder back into place, covering the card slots.
6. Replace the battery pack, and attach the battery door.
To remove the SD card, pull it out. Use tape or an eraser if you have
trouble.
SD Card Slot
Flexible Card Holder