BRx6 Sensor Calibration
Updated: Apr 20, 2017
Page: 4
Tap the “OK” button to close the message. The electronic bubble should now be centered.
The incline updated on the display will vary between 0°00’00.00” and 0°02’07.28”. Tap the
Orange
Arrow
button to complete Step 1.
STEP 2: MAGNETIC STEP-BY-STEP
For Step 2 a tripod and tribrach can be used or a pole can be used. If a pole is used, you will need
to keep the pole as vertical as possible while rotating the pole. A good way to keep the pole
vertical while rotating is to grab the pole with one hand at face height while using the fingers of
your second hand, to rotate the pole. If your pole is extendable, you can use a bipod to keep the
pole vertical, and if you don’t lock the extendable top portion of the pole, you can rotate the top
(extendable) section of the pole.
Attach the BRx6 to the mini-rotary bracket as shown in this exploded view. The second picture
shows the BRx6/mini-rotary bracket/tribrach mounted on a tripod.
