Assembling and Installing Your Gate
NOTE:
You will notice a slight gap between the
gate door latch
and the
frame
.
This is not a defect.
Your gate is a pressure mounted gate and
this gap will disappear once you tighten
your gate in its opening.
STEP 1
Locate the
(4) threaded spindle
rods.
Rotate the
adjustment wheels
along
the threading, eliminating the gap
between the
adjustment
wheel
and the
rubber foot
.
ADJUSTMENT WHEEL
RUBBER FOOT
STEP 2
Insert the
(4) threaded spindle
rods
into the holes at each of
the four corners of the gate.
NOTE:
The ends of the gate frame are not threaded. The
threaded spindle
rods
should slide
into the end of the frame tubes without any resistance.
6
ENGLISH
