ENGLISH
ENGLISH
Step 3.
Attach the 2 foot stand to the bottom of the gate. Refer to Diagram C.
Step 4.
Insert the 4 Threaded Spindle Rods into the holes on the 4 ends of the
gate. The adjustment wheel should touch the end of the fame tube as
shown in Diagram D.
IMPORTANT: The ends of the gate frame are not threaded. The threaded
spindle rods should slide into the end of the frame tubes without any
resistance.
Diagram D
Adjustment
Wheel
Diagram C
Rubber Foot
Adjustment Wheel
Threaded Spindle Rod
Diagram B
Assembling and Installing Your Gate
Step 1.
Attach all the provided panels together. Refer to Diagram A.
Step 2.
Locate the 4 threaded spindle rods. Rotate the adjustment wheels along
the threading, eliminating the gap between the adjustment wheel and the
rubber foot. Refer to Diagram B.
Diagram A
3
4
