4
CARLOTTI G.&C. Snc
VIA GHIARADINO 2
–
40054 VEDRANA DI BUDRIO (BO) ITALIA
TEL: +39 051 6929011 FAX: +39 051 6929110
It is therefore strictly forbidden:
•
To use the machine without having carefully read the use and maintenance manual.
•
To lubricate, adjust or repair the machine when it is connected to the tractor.
•
To use the machine or a tractor when they are not fully functional.
•
To allow persons who are not competent and therefore not authorised to use the machine
and the tractor.
•
To perform sudden inversions, abrupt or imprudent manoeuvres.
•
To leave the tractor and the machine in the working position.
•
To work on slopes and hills without exercising the necessary precautions.
•
To transport persons during the stages of machine transport, for entering and exiting the
field, of transferring, connecting to the tractor, of positioning on the furrow, of adjusting,
repairing, during inversions and manoeuvres, and in any other case where the safety of
operators on board might be endangered.
In any movement of the tractor-machine complex it is always necessary to bear in mind and
carefully follow the rules of the Highway Code.
To improve circulation within the farm it is necessary: to install traffic signs on the internal
roadways to ensure that there is sufficient space in the courtyard area to carry out reversal
without using the reverse gear and to distinguish the transit areas of vehicles from
pedestrian routes with visual signs and signals.
The Manufacturer, Carlotti G. & C. S.n.c. declines all responsibility for damage to persons or
property resulting from improper use of the equipment or from inexperience, imprudence
or negligence and failure to comply with these instructions.
Personnel (see paragraph 2.5 - Operators) who use or operate the equipment must be competent
and must be in perfect physical and mental condition.
They must also be specialised, trained, informed, instructed and qualified in all aspects of use and
maintenance of the equipment.
All other persons are considered unauthorised.
During use, and especially during maintenance and repair, it is essential to use the following work
clothing:
•
Work overalls and comfortable clothes, but not too large and bulky in order to prevent
certain parts from becoming caught in moving gears and/or parts.
•
Safety shoes.
•
Hat and goggles for protection from the sun.
•
Protective gloves for hands, where this does not constitute a danger of entanglement or
dragging.
•
Glasses or masks for the protection of face and eyes.
