How to install an UWP 3.0 system
37
1.7 Micro SD
The IP address of
UWP 3.0
can be changed by using a
“Micro SD” or “SDHC” memory card correctly
inserted into the relevant slot (see
UWP 3.0 Tool
software manual for the relevant details).
N.B: the maximum capacity of the Micro SD card is 16GB.
1. Open the flap located on the
UWP 3.0
front panel. Identify the slot specifically designed for the insertion
of the “Micro SD” memory card.
2. Insert the Micro SD card, making sure it is not write-protected and it is correctly formatted (FAT32).
3. Close the flap. Warning: if the flap is not properly closed
UWP 3.0
will not enable any writing or reading
operation (flap closing is verified by a micro switch located under the flap).
4. As soon as the flap is closed,
UWP 3.0
will install the newly inserted memory card and update the IP
address. Warning: opening the flap during the writing stage will stop the data transfer process and
may potentially damage the Micro SD memory.