How to install an UWP 3.0 system
34
1.5.1 How to connect the USB Dongle Connection Module SH2DSP24
The SH2DSP24 is a
UWP 3.0
accessory module that provides a reliable and cost-effective way to connect
to the Internet by using mobile networks via an USB dongle modem.
The installer has to carry out the following procedure:
1. Connect the SH2DSP24 to the left of the
UWP 3.0
controller;
2. Insert the SIM into the dongle USB modem
(*)
through the SIM slot. Make sure the
SIM is not
protected by a PIN code
(should that be the case, disable the protection). Please refer to the
user manual of the model/manufacturer;
3. Insert the USB modem into the USB port located on the top of the SH2DSP24 module;
4. Connect the 24VDC power supply;
5. Configure it by means of the
UWP 3.0 Tool
software.
SH2DSP24 UWP 3.0
USB Local bus
USB port
dedicated for
Dongle modem
Dongle modem