11
The purpose is to signal the condition in which the input signals to the device are out of the
range in which the DPD is able to make a correct measurement with the required accuracy.
IMPORTANT NOTICE!
IT IS NOT RECOMMENDED TO CHANGE THE DEFAULT SETTINGS FOR EACH
PRIORITY ALARM IF YOU ARE NOT AWARE OF THEIR FUNCTION
I
n the “
OUTPUT 1
” and “
OUTPUT 2
” pages one or more of
the previously set non-priority
alarms are associated with the outputs.
When multiple alarms are set, they are associated with the “
OR
” or “
AND
” logic functions.
The output relays can be configured as “
Normally energized
” or “
Normally de-energized
”.
When finished,
press “
Save
” button on the bottom right to
complete the setup.
A pop-up confirming the completion of the configuration process will appear.
Press “
Done
” button to proceed.