14
Rev.01 | CERTUS Multifunction Safety Module | © 2017 |
CARLO GAVAZZI Automation
EN
11.2 Output configuration
1 Hex-switch position
Action A
Switch off the power supply
B
Rotate the switch until reaching position “F”
C
Switch ON the power supply
D
Power and channel LED’s will blink alternately and slowly
2 Hex-switch position
Action A
Rotate clockwise until the required position is reached
(e.g. A, 2NO + 2NO delay 10”)
B
Wait app. 2.5 secs without moving the switch power
and channel LED’s will now blink fast
C
Configuration accepted
3 Hex-switch position
Action A
Switch the module off and on again
B
Certus wil start with a configuration
C
If the required position is missed the switch must be
turned a full rotation (only clockwise).
D
Repeat the procedure from point
1 A
if necessary
Attention:
While power is OFF you can rotate in either direction.
Attention:
Full rotations in a clockwise direction can be made several times if the right position is
passed.
