Carlisle TyrFil, Flatproofing Technical Manual, Page: 20 / 28

20
TyrFil Flushless Pump | Flatproofi ng Technical Manual
Waste Disposal
Protection of the environment should be a primary concern of everyone. Proper procedures must be in
compliance with local, state and federal waste disposal regulations. Should materials become contaminated,
and thus not usable, they will have to be handled as hazardous waste and disposed of according to local,
state and federal regulations.
Solvent Containers – See the SDS for disposal of empty isopropyl alcohol containers.
Liquid Waste – In most states (check your local, state and federal regulations), liquid waste containing fl ush
and alcohol must be kept in a closed drum, labeled “FLAMMABLE WASTE”, in an approved solvents storage
area until delivered to a licensed disposer.
Salvaging Rims
Flatproofed tires mounted on wheels with split rims can be removed with a hydraulic press. All other
fl atproofed tires can be removed from rims by the following procedure:
1. Use Reciprocating Saw – Grind teeth off saw blade to create a knife edge.
2. Cut Casing – Cut through the sidewall, around both sides, near the rim. Then make one or more cuts
across the tread, from one sidewall cut to another.
3. Remove Tread – Peel off casing to expose the cured material inside.
4. Remove Core – Cut across cured material from side-to-side and pry away from the rim.
5. Remove Sidewall – Pry remaining bead off the rim.