Carl Valentin Spectra II, Quick Reference Manual

Page: 62 / 102

Spectra II
62 English
Loading label roll in tear-off mode
A
B
C
D
E
G
H
F

Open the printer cover.

Open printhead (G) by turning the pressure lever (H) anticlockwise.

Remove the outside label mounting plate (A).

Load the label roll with inner winding onto the unwinding roll (B) and attach again the label mounting plate (A).

Lead the label material below the label guiding (D).
Pay attention that the label runs through the photocell (E).

In order to move the printhead (G) down, turn the pressure lever (H) in clockwise direction until it locks.

In front of the printhead you can see the tear off (F) from which you can rip off labels to the bottom.

Enter the offset value in the menu Print settings/Tear off .

Adjust the limit stops (C) of the label guiding to the width of material.

Close the printer cover.