Carl Valentin Dynacode II IP107, Operating Manual

Page: 147 / 168

Dynacode II IP Error Correction
03.21 Operating Manual 147
Error message Cause Remedy
123 Print asynchronous
The label photocell does not
work in the order as it is
expected according to print
data. Check label size and gap size.
The settings of the photocell
are not correct. Check label photocell settings.
Settings of label size and gap
size are not correct. Check correct loading of label
material.
No label found at the rear
printhead. Insert new label roll.
Soiled label photocell. Clean the label photocell.
Labels not inserted correctly. Check if labels are inserted
correctly.
124 Speed too low
The print speed is too slow. Increase the speed of
customers' machine.
125 DMA buffer
Communication problem HMI. Restart the printer.
126 UID conflict
Configuration RFID
programming faulty. Run RFID initialising.
127 Module not found
RFID module not available. Check the RFID module
connection.
Please contact your
responsible distributor.
128 No release signal
No print release by higher-level
control (customer machine). Activate release signal at the
higher-level control.
129 Wrong firmware
Firmware does not match the
used printer type. Use firmware that fits to the
printer type.
Please contact your
responsible distributor.
130 Language missing
Language file for the set printer
language is not available. Please contact your
responsible distributor.
131 Wrong material
Label material does not fit to
printing data. User label material with
suitable label and/or gap
length.
132 Invalid mark-up tag
Invalid mark-up formatting
characters in text. Correct the formatting
characters in the text.
133 Script not found
LUA script file not found. Check the file name.
134 Script failure
LUA script is incorrect. Check the script.