Carl Valentin DPM IV Operating Manual Download Page 36

Page: 36 / 110

Installation and Initiation

DPM IV

Operating Manual

05.18

5.9 Connecting the Direct Print Module

The direct print module is equipped with a versatile power supply unit.
The device may be operated with a mains voltage of 110 to 230 V /
50-60 Hz without any adjustments or modifications.

CAUTION!

The direct print module can be damaged by undefined
switch-on currents.



Set de power switch to '0' before plugging in the direct
print module.



Insert plug of power cable into a grounded electrical outlet.

NOTICE!

Insufficient or missing grounding can cause faults during
operation.

Ensure that all computers and connection cables connected to
the direct print module are grounded.



Connect direct print module to computer or network with a
suitable cable.

5.10 Before Initial Operation

1. Mount print mechanics.

2. Connect all cables between print mechanics and control unit and

protect cables against unintentional unscrewing.

3. Connect compressed air line.

4. Connect control unit and PC by printer interface.

5. Connect control unit and packaging machine by inputs and

outputs.

6. Connect power cable of control unit.

Connecting to the
power supply

Connecting to a
computer or to a
computer network

Summary of Contents for DPM IV















































































































Search results

Summary of Contents for DPM IV

Reviews:

Related manuals for DPM IV

Brands by name

Popular brands

Carl Valentin DPM IV, Operating Manual

Search results

Summary of Contents for DPM IV

Reviews:

Related manuals for DPM IV

Brands by name

Popular brands