4. Plug in the pressure cooker. The LED screen will light up and displays ’----’, indicating that the cooker
is in standby mode ready to be turned on. A sound will also notify the user that the pressure cooker is
powered on.
5. Select a preset pressure cooking program
（
Poultry/Meat stew/Bean Chili/Soup Broth/Rice/Multi-Grain/
Porridge/Pressure cook/Steam/Egg/Cake/Yogurt
）
. The selected program indicator light will be on.
6. The preset programs’ default cooking mode is set at “NORMAL”. The preset pressure level may be LOW
or HIGH for different programs. By pressing the Manual button, You may adjust between Less, Normal, More,
LED will show different time accordingly or you can increase or decrease the time by +/- button.
7.After setting, press the “Start” button to start cooking. 3 sounds will beep to mark the start. And the LED
will show means preheating, indicating the pot is warming up.
Note: For the “Rice” program, you cannot adjust the cooking time. It will be automatically adjusted according
to the ingredients. After pressing the program or manual button, the time showed on LED will flash, if no
further operation, it will return to ---- after 10 flashings.
8. Depending on the amount of food and its temperature, the preheating cycle can last from a few minutes
to 40 minutes or more.
Note: It's normal for some steam to release from the Steam Release Valve along with occasional sputtering
during the preheating process. As the cooker heats up and pressure builds, the Float Valve rises.
9. When the working pressure level and temperature has been reached, the cooker will begin the cooking
cycle. The LED screen will show the time preset and start count down.
Note: The pressure cooker may make a minor clicking sound while cooking. This is normal.
10. Once the cooking cycle has finished, the cooker beeps 10 times and goes into Keep Warm mode if this
function is turned ON. The LED displays the elapsed time.
11. After 12 hours, the cooker automatically turns OFF and will enter standby mode. You may also press
“Cancel” to end cooking. The LED will display ----, indicating that the cooker is in standby mode. Users can
also switch Keep Warm ON/OFF, adjust the time at any time accordingly to set keep warm time.
PRESSURE COOKING INSTRUCTIONS
13
