CarKids 360, Instruction Manual

Page: 20 / 112

20
EN
Note:
Use backrest rotating handle to swivel the seat 180° for forward facing installation,
backrest hanger and L-backrest hanger are hooked each other.
Uninstalling the ISOFIX system
1. To free the Top Tether, press the button and pull the tether strap in the
opposite direction (the indicator will change from green to red color), in order
to take off the top tether.
2. To free the ISOFIX anchoring, press backwards the ISOFIX System unlock
buttons (the indicator will change from green to red color), in order to free the
seat from the vehicle ISOFIX anchoring system.
5.3 GROUP II/III (15 to 36kg) – lnstall Forward Facing: belt+Fix or belt only
For belt+Fix, please refer to 5.3.1-5.3.10
For belt only, please refer to 5.3.1-5.3.5, then turn to 5.3.8-5.3.10.
5.3.1 Ensure that the child seat’s 5-point harness and buckle are removed
correctly (see 4.4)
5.3.2 Ensure the seat is ready to install in forward facing (Group II/III),
pull the backrest reclining handle to adjust to angle to position 1 , 2 or 3,
then release the handle.
5.3.3 lt is necessary to swivel the seat 180° to place the seat in the direction
of travel. Release the backrest rotating handle when the seat is in the
desired position.
5.3.4 Before installing the safety seat, place your child in the seat and adjust
the headrest to the correct height (see 4.9)
5.3.5 Place the child safety seat in the back seat of the vehicle facing in the
direction of travel.