CarKids 360, Instruction Manual

Page: 11 / 112

11
EN
4. Care and Maintenance
4.1 How to use the harness buckle
4.1.1 Guide the two buckle latches together.
4.1.2 Make sure right side up.
4.1.3 Engage them before putting them into the harness buckle,
this should make a CLICK noise.
4.1.4 Pull shoulder be its to remove all slack from the lap section ensuring
the harness lies flat and harness buckle locked. Open the harness buckle
by pressing the red button.
4.2 Care for the harness buckle
lt is vital for the safety of your child that the harness buckle works correctly.
Malfunctions of the harness buckle are usually caused by accumulations of
dirt or foreign bodies.
Possible malfunctions:
• The buckle latches are ejected only slowly when the red release button is pressed.
• The buckle latches will no longer lock (i.e. they are ejected again if you try to
push them in).
• The buckle latches engage without an audible CLICK.
• The buckle latches are difficult to insert (you feel resistance).
• The buckle only opens if extreme force is applied.
4.3 Remedy
Wash out the harness buckle so that it functions properly once again.