
3.2
Installation
3.1 FIRST INSTALLATION AND START-UP
3.1.1
Positioning the machine
Positioning the machine:
•
Indoor with temperature above 5 °C.
•
At a minimum distance of 150 mm from walls or other objects,
to facilitate ventilation.
•
+RUL]RQWDOO\RQDÀDWVWDEOHVXUIDFHDWDKHLJKWEHWZHHQ
mm and 960 mm.
WARNING
Position the machine on a horizontal surface.
WARNING
Do not obstruct the openings or slots for ventilation or heat dissipa-
tion and do not insert water or any kind of liquid.
WARNING
In case of prolonged storage at a temperature below 2 °C, empty
the machine hydraulic system. Do not switch the machine on be-
fore having reconditioned it for at least 1 hour at a suitable room
temperature. If it is installed in areas with room temperature above
30 °C, malfunctioning may occur.
NOTE
The machine with raised containers cannot be installed under-shelf
owing to its wider overall dimensions.
600 mm
150 mm
<960 mm
>700 mm
30°C >
> 5°C
= 30÷70% non-condensing
Description end
Positioning the machine
Summary of Contents for BlueDotPlus
