Carguard G 7050, User Manual

Page: 11 / 88

11
G 2500 English
15. Anti-carjacking
To activate this feature,you need to press
“Override”when the engine is running,car door will be closed
then opened to activate this feature,followed by car parking light flashes 1 time, and the LED indicator of
antenna starts to flash.Regarding the steps to turn on and turn off anti-carjacking feature,please refer to
category 16“Anti-carjacking by remote”.
LCD screen displays
：
16. Anti-carjacking by remote
This feature can prevent the car from taken away by an unauthorized driver .This feature will be activated
only when the ignition is turned on.Please press and hold and together then release
until car parking light flashes 1 time and LED indicator of the sytem start to flash too. This feature has 3
operation steps
：
Step 1
：
Sytem will not response in the first 30 seconds after Anti-carjacking by remote is activated
therefore to keep distance between intruders and you.
Attention
！
In step 1,if the remote is out of operation range,you will need to press within 3
seconds or press and hold
“Override”button.
Step 2
：
The siren chirps in the following 30 seconds,parking light flashes.
Step 3
：
Anti-carjacking mode only lasts for 60 seconds then siren will be activated. Engine is locked up.
Attention
！
To disable anti-carjacking mode in step 2 and 3
：
1. Turn on ignition.
2.
Press “Override ”for 3 seconds.
（
Siren chirps 3 times
）
3. Turn off ignition
4. Anti-carjacking mode is disabled .System is under arm mode.
If PIN code has been set up ,you must enter PIN code to disable anti-carjacking mode.
LCD screen displays
：
17. Valet mode
If your car is handed to third person,you may use valet mode,example: under maintenance.When
valet mode is activated,system can only execute few features like auxiliary channel and power door locks
control .Under disarm mode,press and hold until remote beeps
（
or the LED indicator color of
1-way LED remote turns green
）
,then press
,or when ignition is turned on,pres “Override” button for
3 seconds to turn on or turn off valent mode. When parking light flashes 4 times and siren chirps 4
times ,that means Valet mode is activated. The LED indicator of the antenna will be lit continously.
LCD screen displays
：
18. False trigger detection
Carguard G 7050 is a car alarm sytem with high integration, multi-level algorithms has been deployed for
designing false trigger detection.
Level 1
When arm mode is activated,control center will test on all the trigger zones,if a sensor is not
functioned properly,system will shut it down and inform you by siren's 4 chirps.
LCD screen displays
：
the image of corresponding sensor.
Level 2