MFT-9 Multi-function Infrared Thermometer
Functions
Real Time Clock
The real time clock will be recorded with the memory function and help you to recognize each
measurement result. (It includes the 12/24 Format_Hour_Minutes_Date.)
Please see the “Real time clock setting” section to learn how to setup the time in the first use.
Room Temperature
Suitable ambient temperature is important for the baby and patient, the thermometer always help you
recognize the room temperature.
Setting “Real time clock” first to enable this function. After power off, room temperature will be shown
on the screen with icon.
Please see the “Use of the thermometer” section to learn how to get the correct room temperature.
Ear / Forehead
Temperature
The thermometer has been designed for practical use. It’s not meant to replace a visit to the doctor.
Please also remember to compare the measurement result to your regular body temperature.
Please
consult with doctor if you have health concerns.
Please see the “Use of the thermometer” section to learn how to measure the body temperature.
Surface Mode
The surface mode shows the actual, unadjusted surface temperatures, which is different from the body
temperature. It can help you to monitor if the object temperature is suitable for the baby or patient, for
example the baby’s milk.
Please see the “Use of the thermometer” section to learn how to measure the object temperature.
Stopwatch
The thermometer built the stopwatch function to help you to monitor the heartbeat since heartbeat is one
of the healthy indexes for people.
Please see the “Use of the Stopwatch” section to learn how to measure the heartbeat result.
Temperature Alarm
If thermometer detects a body temperature
≧
99.5°F (37.5°C), there will be a long beep sound followed
by three short beep sound to warn the user for the temperature is above 99.5°F (37.5°C).
Zone Indicator
Under ear or forehead mode, if thermometer detects a body temperature <99.5°F (37.5°C), there will be "
Green" light signal; if temperature
≧
99.5°F (37.5°C) and <100.4°F (38.0°C), there will be" Yellow" light
signal; if temperature
≧
100.4°F (38.0°C), there will be" Red" light signal.
RED: Warning - Immediate response by the OPERATOR is required. Suggest continually monitoring
the body temperature. If in doubt about the person’s condition, seek medical assistance.
YELLOW: Caution - Prompt response by the OPERATOR is required.
GREEN: Ready for use.
Memory Locations
There are total 9 sets memories for body temperature. Each memory also records the measurement
date/time/mode icon and site location.
When in power on, press the “ON/MEM” button to see the temperature stored with
icon.
°F / °C Switch
In “power off” mode (The LCD only shows the date, time and room temperature). Press and hold the
“FOREHEAD” button, then immediately press and release the “ON/MEM” button. After 3 seconds, icon
“°F” will be switched to icon “°C”. (You may use the same way to switch back to “°F”)
Intended use:
The infrared ear/forehead thermometer can measure the infrared heat generated
by eardrum/central forehead area and surrounding tissues to reflect patient’s
body temperature accurately.
Intended operator: At least 11 years old (5 years intensive reading experience), no maximum.
Specifications
Temperature measurement range:
Ear / Forehead mode: 93.2~108°F (34~42.2°C), Surface mode: -7.6~176°F (-22~80°C)
Operating temperature range: 50~104°F (10~40°C), 15%~85% RH
Storage temperature range: It should be stored at room temperature between -4~122°F
(-20~+50°C), RH
≦
85%
Transportation temperature shall be less than 158°F (70°C), RH
≦
95%
Atmospheric pressure: 800~1013 hPa
Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),
IEC/EN60601-1(Safety) standards, ISO10993, RoHS.
Accuracy:
For ear / forehead mode:
±
0.4°F (0.2°C) within 95~107.6°F (35~42°C),
±
0.5°F (0.3°C) for other range.
For surface mode:
±
0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),
others
±
4% or
±
4°F (2°C) whichever is greater.
Temperature alarm & Memory locations under “Ear/Forehead mode”
(with each measurement date/time/mode icon)
3 color LED Zone Indicator
Real time clock, °F / °C Switch mode
Battery: one lithium cell battery (CR2032 *1pcs)
Battery life: around 3,000
continuous readings.
Expected Service Life: 4 years
This thermometer converts the ear/forehead temperature to display its “oral equivalent.”
(according to the result of the clinical evaluation to get the offset value)
Enclosure Rating: IP22
Dimensions: 146.4 x 38.3 x 54.8 mm
Weight: 63.3 grams including battery
The device should not submerge into any liquids and expose it to direct moisture.
There is no gender and age limitation for using infrared thermometer.
This is not an AP
or APG product.
Before the measurement, please make sure the selected
button accords with the measured position.
