Step 3:
Pull out the 3-point safety belt of the vehicle and get it through the belt guide-down of the
car seat on the opposite side (Fig.4)
make sure both the shoulder belt and waist belt get through the slot (Fig.5).
Lower the waist onto the child’s pelvis and check to make sure the safety belt is not twisted. Fasten
the safety belt into the buckle of the vehicle.(Fig.6)
DIAGONAL BELT
BELT GUIDE-DOWN
DIAGONAL BELT
LAP BELT
LAP BELT
Fig 5
Fig 4
Step 4:
Get the shoulder belt through the slot1 at the side of the headrest and fasten it by the
pulling, check and make sure the safety belt is not twisted.(Fig.7) Please make sure the position of the
safety is not near the throat to avoid any risk of strangling.
The satisfactory position of the adult safety-belt buckle relative to the child car seat is as the Fig.6.
You can contact the child car seat manufacturer if in doubt about this point.
Fig 6
Fig 6
PR
ES
S
PR
ES
S
PR
ES
S
PR
ES
S
Fig 3
Fig 2
19
Fejan_manual_1653606-08.indd 19
2016-04-21 15:13
