ENG
Fixing the blower to the support
Procedure:
Fig.3.d
Fig.3.e
1. Remove the knock-outs
2. Insert the L-shaped brackets into the
holes and place the blower on the
support. Secure it using the screws
Fig.3.f
Fig.3.g
3. cut the insulating panel (C) to remove
the screws from the steam hose fitting
4. Replace the curved fitting (A) with
the straight fitting (B)
Fig.3.h
Fig.3.i
5. Slide the support S fully in
6. Tighten the fixing screws to the
threaded inserts. Fit the cable gland P.
Install the steam hose, the condensate hose and the power cable following the steps described in the
previous paragraph and the notes in chap. "Preparing for assembly".
14
| 3. Assembly
VSDU0A0003
+030222190
rel.
1.4 – 11.02.2021
