5-7
Corrective Maintenance
Alaris
®
Auto-ID Module
Technical Service Manual
5.2
dISaSSeMBly/reaSSeMBly
(Continued)
5.2.4 Camera/Frame/Board assembly
1. Remove nut attaching keypad ground
wire to IUI Bracket.
2. Disconnect from Logic Board:
• Internal Cable -
J5
• LED Harness -
J6
• Keypad Cable -
J11
3. Remove screws (
4
) attaching Internal
Frame/IUI Bracket to Front Case.
during reassembly:
• When reattaching keypad ground wire,
route wire to avoid pinching.
• When reconnecting cables to Logic
Board, use an orange stick or similar tool
to ensure cables are securely seated into
connectors.
Keypad Cable
Keypad Ground Wire
Internal Cable
LED Harness
Summary of Contents for Alaris 8600
Page 45: ......
Page 46: ...Alaris Auto ID Module Technical Service Manual...
