APEX
7
M
ANUAL
O
VERRIDE
If 110V power is not available to the coach, the Apex awning can still be safely
retracted using the manual override.
7mm Hex
Manual Override
RTA015a
LH Motor
RH Motor
Lead Rail
Open
Close
Open
Close
1.
The bypass is located inside the case, near the end cap. To access, remove the
large rubber plug on top of the awning located toward the rear of the case
on the motor side.
2.
Chuck the supplied 7mm hex key into a 3/8” battery powered drill.
3.
Insert the hex key into the manual override on the awning.
4.
Operate the drill in the direction shown in the diagram to close the awning.
Reverse the drill to open the awning.
5.
When done, reinsert the rubber plug.
Manual
Compliments
of
Northwest
RV
Supply
Printed
From
http://www.nwrvsupply.com
