UI SmartSeatPro
II
User Guide. Iss1 06/22
31
The SmartSeatPro
II
can be fitted with
a tray, which can be used to assist in
the user’s upper limb positioning and
engagement in activities; it should never
be used as a restraint.
•
Once the occupant is sat in the chair,
rest the tray across the arm rests so
that the tray fits snugly against the
user but does not press in to their
abdomen.
•
The buckles on the tray straps connect
with the buckles on the inside of the
chair sides. Clip the two halves of the
buckles together on all four straps.
•
Adjust the tension in the tray straps
to secure the position of the tray.
Then tension can then be adjusted to
change the front-to-back position of
the tray.
14. Tray (Accessory)
SmartSeatPro
II
tray.
If a chair is ordered with a tray the
chair will be fitted with the appropriate
attachment straps. If a tray is ordered
separately then attachment straps will
need to be fitted to the chair.
To attach the tray straps to the armrest:
1. Remove each arm from the chair and
lay down.
2. Remove the 2 x caps from the inside
of the arm and discard.
3. Fit the two straps (KIT32) to each arm
using a 4mm Hexagon key 2 x bolts &
2 x washers provided.
4. Fix the 2 x CFLEXMP034 (plastic triple
mounting slot plate 40mm) through
the holes, with M6 x 25mm button
head screw and washer, in each arm.
5. Refit the arms.
6. The tray straps can now be clipped to
the armrest straps.
14a. Retrofitting Tray Straps
Securing the tray straps using a 3mm
Allen key.
Connect tray straps.
•
Always ensure that the tray does
not interfere with any stoma
devices, feeding tubes or similar
devices in-situ.
