UI SmartSeatPro
II
User Guide. Iss1 06/22
21
10f. Offset Adjustment
Each back cushion element can be
adjusted left and right independently.
•
The sacral cushion element offset
range is limited by the seat width
setting.
The rear mounting brackets of each
cushion element contain two hand wheels
that should be loosened to permit left
or right movement of the back section
element. To operate:
•
Loosen the hand wheels gently in an
anticlockwise motion until the back
section can be moved.
•
Do not loosen more than two turns or
the hand wheels may come loose.
•
When the optimum location is found
for the back section, tighten the hand
wheels in a clockwise motion until
tight.
•
Note the notches in each section
which are spaced by 20mm of travel.
Offset adjustments.
10g. Back Filling Adjustment
The back cushion elements have
removable Dacron filling that can be
adjusted where needed.
•
Find the zip on the bottom of each
back section.
•
Unzip to locate the internal Dacron
filled pillow.
•
Add or remove Dacron as per required.
•
Place pillow back into back section and
zip up.
•
Do not make adjustments without an
assessment and attending Health and
Social Care Professional.
•
Each section has its own unique
pillow, ensure each pillow is returned
into the correct section.
Remove or add the Dacron filling
where adjustments are needed.
