PAGE 10
7. CHARGER
8. INSPECTION & MAINTENANCE
Warning
1. Ensure the output – DC voltage corresponds to the battery type and
voltage. Otherwise it may cause damage to the charger/battery.
2. Switch off the charger before connecting e charger and the battery.
3. Do not expose the charger to rain, water or flammable materials.
4. The warranty is given for use within normal operating conditions; it does
not cover accidental damage, or problems caused as a result of a user
neglect or misuse.
5. Please keep the charger at least 2 inches away from other objects when
charging.
6. Do not use it on wet and dirty surfaces.
7. Do not place the charger on the battery.
8. Always charge the battery in a well ventilated area.
BATTERY
Please charge the battery after long distances to prolong battery life. If you do not drive
the power wheelchair for a long period of time, then charge at least every month.
Replace with a maintenance/water-free batter to avoid any problems, available from
your dealer.
MOTOR
The carbon brush connector and brakes should be carried out on a level floor with at
least three feet of clearance space around the power wheelchair.
ELECTRICAL BRAKES
Testing of the electrical brakes should be carried out on a level floor with at least three
feet of clearance space around the power wheelchair.
Power on the controller, and push the joystick forward slowly until you hear the
electrical brake working. The power wheelchair may start to move. Immediately release
the joystick, you must be able to hear each electrical brake within a few seconds. Repeat
the test three times, pushing the joystick backward, left and right respectively.
SOLID TYRES
Check front/rear regularly and replace them when worn out.