PAGE 9
INSTRUCTIONS
7. CHARGER
SPECIFICATION
Input Current
2A dc+5%
Output Voltage
24.0Vdc+2%
Input Voltage
95-250Vac
Output Detection
1. Short Circuit Detection
2. Output Voltage /Current Limit
3. Reverse Power Protected
Operating temperature
0°~40°C
Weight
365g approx.
1. Connect the charger to the controller (figure I). Then connect the power lead
(figure II) into the battery charger. Finally, connect the 3 pin plug into the
mains (figure III).
2. Switch the power on to charge the battery.
3. When the LED turns green the battery is fully charged.
4. Unplug from the mains and controller, then store safely and out of a reach of
children.
Warning
Ensure charging using lead acid batteries only.
